Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser for CAN buses. It is discrete, does not use LED indicators or key fobs and is concealed in the vehicle's wiring.
It also allows users to turn off the system temporarily by using Transport Mode for when they are renting out their vehicle. This guide will take you through the process of installing a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a modern security device that guards your vehicle against hacking, key cloning and relay attacks. The system is connected directly to the ECU of your car and protected by a PIN code that you choose. It is not detected by thieves using diagnostic scanners and other advanced methods. It isn't able to be disabled by cutting circuits.
The system is simple to use, but it is essential to have a an expert installation to ensure a clean and secure connection to your vehicle's ECU. Installers who are approved by Thatcham can assist with the installation and programming of your Ghost system. They can also recommend a tracking or alarm system to complete the protection package for your vehicle.
The first step is to disconnect your battery in order to avoid accidental airbag deployment or short circuits. Once the battery is disconnected, the installer may safely begin working. Basic hand tools are useful to make precise connections and a multimeter can be used to test electrical values and safety. Insulation tape and cable ties are also vital for protecting connections and keeping wiring neat. Lastly, the user manual gives specific guidelines that are tailored to your Ghost Immobiliser model.
It is important to choose an area for grounding that is free of dirt or paint during installation. The installer should ensure that the immobiliser's CAN H and CAN L wires are connected to the correct ports on the vehicle's ECU. These wires can be connected or soldered, depending on the model. Using a quality connector is recommended to ensure a long-lasting and secure connection.
Transport Mode can be turned on by the client after the installation is completed. This allows the vehicle to be used by valet parking or mechanics without needing to know the pin code. The customer has to press the icon for service on the dashboard five times over two seconds. The system will confirm this by displaying 5 indicators.
The Autowatch Ghost 2 is a highly effective immobiliser that's TASSA certified and Thatcham approved. It's a great choice for anyone who frequently rents out their cars on platforms like Turo. An immobiliser can cut down on insurance rates, as it lowers the chance of theft.
Getting Started
It's not difficult to come up with an autowatch immobiliser if you want to protect your car from thieves. The device prevents your vehicle from starting when someone copies or steals your key. It's possible due to its advanced technology that stops the engine from starting until the correct PIN code has been entered.
The device connects to the vehicle's bus network, CAN, allowing direct communication with the ECU. It makes use of buttons already on the dashboard and the steering wheel to create a unique sequence only you can identify which makes it impossible for someone else to start your car. This is the ultimate system to protect your pride and joy. It will not lose its value should you ever decide to sell it.
Installing Ghost's immobiliser is straightforward, but you must follow the instructions to avoid electrical issues and system malfunctions. You'll need to locate a 12V power supply and a good grounding on the car's chassis. Then, you can start connecting the wires to the immobiliser. Make sure to use high-quality connectors and soldering techniques to ensure a strong connection. Make sure to shield the connections with heat shrink tubing or insulation tape, or other materials to avoid short circuits of electricity.
After the wires are connected, you can plug in the battery and start the engine to test whether the immobiliser works. After you've confirmed that everything is working properly and you are satisfied, you can place the immobiliser in a safe location in the vehicle. Be sure to hide it well to ensure that thieves cannot get it into a compromising position.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified this means it complies with the highest standards of security and is a fantastic protection against car thieves. It is invulnerable to hacking and key cloning and cannot be disabled without a code. It is also simple to use and can be set into the service valet mode to ensure that your automobile is not activated when you bring it in for maintenance or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system that is specifically designed to deter theft of vehicles. It connects directly to your car's CAN bus network and communicates with the ECU, making it virtually undetectable to your vehicle. In contrast to other aftermarket systems that require the removal of circuit components, the Ghost Immobiliser doesn't interfere with any of your vehicle's factory settings.
It's also completely undetectable to thieves using diagnostic scanning devices. This is because the system does not transmit and receive radio frequency signals, and it relies on the CAN data to communicate with your ECU. Additionally, it doesn't require any modification to your car's existing key fobs.
To utilize the Ghost Immobiliser, simply turn on your car's ignition and enter your disarm sequence (either one or two buttons). The indicator will flash twice to verify that you've entered the correct code. You can now begin driving your car in a safe manner.
Once installed, the Ghost Immobiliser will secure your vehicle from key cloning and hacking, while protecting the value of your most prized possession. In Transport Mode, you can temporarily disable the Ghost Immobiliser when you need to give your vehicle to service or valet parking.
To complete a Ghost Immobiliser installation, you'll need locate an energy source that is constant (12V) and an earthing point. Be sure that they are well-insulated and safe to touch. Cable ties are also suggested for bundling and securing the wires. This will reduce the risk of theft by potential thieves. Be sure to double-check the location of these points to avoid making mistakes and mark them with an adhesive or label. It's important to check every connection for signs of wear and tear. Connectors that are loose could cause system malfunctions, so be sure that they're firmly in place and securely insulated. Make sure to test your Ghost Immobiliser after the installation is completed. This will confirm that the unit is operating properly and that all connections and insulation are secure. Make sure to address any issues as soon as they arise.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge car security system that seamlessly into your car's ECU to prevent unauthorized engine start. The innovative technology it uses protects your vehicle from key cloning and hacking and other common tactics that thieves employ to steal cars. The Ghost works in conjunction with existing tracking and alarm systems to provide the most effective security for your car. This system's unmatched features and discreet design make it a popular choice for car enthusiasts and security-conscious drivers alike.
It is important to follow the steps of installation in order to ensure the proper integration of Ghost Immobiliser. Refer to the wiring diagram of the vehicle as it will aid you in locating and connecting the wires. The next step is to determine the grounding and power sources. Once you have located them, you will have to mark them to make them easily identifiable when installing. In addition, it is vital to use only the best tools and materials. Basic hand tools will help you make precise connections. A multimeter will check electrical values, and also ensure safety. Cable ties and insulation tape will keep the connections neat and tidy. ghost autowatch immobiliser -specific user's manual is also available.
It is important to test the system prior installing it. Enter the PIN code into the system and then start the vehicle. This test will verify that the immobiliser functions as intended and stop unauthorised vehicle starts. It's recommended to perform this routinely as part of your regular inspections of the vehicle to ensure the system is operating correctly.
Once the installation has been completed, you can begin driving your car with confidence. The Ghost will help keep your precious possessions secure from thieves who might steal it and ensure that no one can drive off with your vehicle without the proper PIN code. The Ghost can be paired with an approved Thatcham tracker that detects any attempts to steal or tamper with. This lets you track your vehicle if it is stolen.
The Ghost can be used on a variety of vehicles and is compatible with all major manufacturers. Monty's Locksmith can help you secure your vehicle using this cutting-edge device. Contact us today to find out more about our services and installation options. We are a TASSA registered installer, which guarantees we follow strict standards in the installation of our products. This assures insurance companies, customers and law enforcement agencies that installations are done in a safe and correct manner.